top of page
  • Writer's pictureVitxCycle

Getting your bike winter ready?

Updated: Dec 9, 2021

Winter is now upon us and that means making sure your bike is ready for the conditions it/you are going to face.

Wind, rain, snow, ice and gritted roads can take their toll on your bike so we’ve jotted down some setup and maintenance tips to help you keep peddling through the winter months.


Winter riding is tough on your bike so you want to make sure it starts off its cold weather season in the best condition possible. A minimum should be to give it a really good clean, lube and make sure all the gears are firing efficiently. However, a complete strip and rebuild is the ideal, paying particular attention to unsealed bearings and cables.

Although more expensive, consider fitting sealed cables as they will run smoother for longer. If you don’t feel your mechanical skills are up to the task, book it into your local bike shop. It will cost you a bit of money but, when your bike is still going strong while your mates’ are starting to creak and misfire, you will know it is money well spent.


Although thought of as unfashionable and ugly by some, mudguards are essential for winter riding. They will keep you and your bike cleaner and drier, help protect it from corrosive salt and will make you a lot more welcome if you ride with a club or group. (Don’t be that person who has to always be at the back as you spray all those behind you with road muck!)

They are even mandatory for many winter club runs. Even if your frame hasn’t got dedicated drillings for mudguards, there are numerous clip-on versions that will even fit super low clearance racers. They can be a bit fiddly to fit initially, but once on, you will wonder why you ever rode in the winter without them.


If you are giving your bike a complete strip down and service before the winter, also consider applying some protective wax to the frame. You can buy specialist products but plain car wax also does the job fine. It will act as an extra layer of protection against salt, will make cleaning road grime off easier and give your bike an as new shine. Also, when you clean your bike, finish off with a covering of a silicon based bike spray. Again, this will make dirt and grime far easier to remove.


You are cold, wet and tired but, if you just dump your bike in the shed and head for the shower, you can guarantee that the next time you ride your drivetrain will already be rusting. At the very least, rinse the entire bike with clean water to remove dirt and salt, spray water dispersant on the drivetrain (WD40 does the trick), run the chain through a rag and then re-lube the chain. It is only a five minute job at the most and your bike will thank you for it.


Winter roads aren’t the place for super skinny lightweight tyres, choose some robust rubber and opt for tougher inner tubes. You will barely notice the increased weight and you will certainly appreciate not having to fix a flat on a freezing roadside.

Many cheaper winter tyres achieve their durability by using a hard rubber compound which will certainly be tough but can also be like riding on ice. Spend a little more and you will get tyres with anti-puncture features, such as kevlar strips, but don’t compromise on the grip. Wider tyres (25c/28c) will give you a plusher ride and are worth considering but check that you have got enough clearance if running mudguards. You might also consider running your winter tyres at a lower psi than you would your summer tyres as this helps make for a smoother ride, reduces the risk of punctures and aids grip.

Winter bike (think n+1)

Rather than subject your pride and joy to the horrors of winter roads, a second dedicated hack is the ideal solution. Especially if your 'best bike' has top line components, not having to replace them after a winter of use, can easily recoup the cost of a sensible winter bike over a couple of years.

Choose a solid alloy or steel frame with dedicated mudguard drillings, tough and easy with true alloy wheels and a mid-range groupset (including disc brakes) and let it do the hard miles while your carbon flyer stays warm and packed up. Another option is to go for a cyclo-cross bike or gravel bike. Put road tyres on it and you have got a robust winter trainer and, if the roads get too icy or you fancy some race action, put some knobbly tyres on and get off-road.

The warmer option (stay indoors)

Finally, it the weather is too cold, windy, icy, dark or just generally unpleasant there’s always the option of bringing your ride indoors by using a turbo trainer, that way you can still get a ride in no matter what the weather!!

Happy cycling


Recent Posts

See All
bottom of page